4.Critical alarm indicator
1.Adopt advanced MCU microprocessor control technology
2.Advanced MPPT Technology.High converting efficiency higher than 97% for
minimizing energy loss.
3.Reversed current protection at night.over voltage and reverse polarity protection
4.Capable of selection different charging mode fo various types of batteries
6.Industy-leading power density compact size and high reliability
7.Doorframe designed with waterproof structure, posted on the seal and equipped with wateerproof lock in the door double insulation design
8.Cabine adopt quality galvanized wheet or aluminum coated steel sheet as material, surfce coating anti-UV power
9.Suitable for outdoor installation
10.With remote monitoring system aperation
A Rectifier Module
B Fan Module
C Controller Smartpack
D MPPT Solar controller Module
Power plant or substation power for controlling, protection and automatic device, emergency lighting, communications, steam turbine DC oil pump and so on independent DC systems. It can provide reliable power supply in the case of a power failure completely in plant or substation. The traditional DC systems connect battery pack and run with float charging mode. The new DC system run with silicon controlled rectifying power supply for battery.
|SHW48500 Solar System||Rectifier Module(1-10) MPPT Solar Charge Controller(1-10)|
|MPPT Range @Operating Voltage||60 ~150VDC|
|Maximum PV Array Power||3000W|
|Maximum Input Current||62A|
|Nominal Battery Voltage||42-58VDC|
|Maximum Charge Current||50A(max:61A)|
|Charging Method||Three stages: bulk, absorption and ﬂoating|
|Overload Protection||> 110% : audible alarm|
|Polarity Reversal Protection @Solar Cell & Battery||Yes|
|LCD Panel||LCD panel indicating solar power, load level, battery voltage/capacity, charging current, and fault conditions|
|LED Display||Three indicators for solar, charging, and load status|
|Rated input voltage||220V|
|AC input Voltage range AC||90-290V|
|input Frequency range||45-65HZ|
|Rated output voltage||48V|
|Rated output current||0-50A|
|Humidity||0 ~ 100% RH (No condensing)|
|Operating Temperature||-20°C to 55°C|
|Storage Temperature||-40°C to 75°C|
|Altitude||0 ~ 3000 m|
Power plant or substation power for controlling, protection and automatic device, emergency lighting,
communications, steam turbine DC oil pump and so on independent DC system. It can provide reliable power
A battery pack and run with float charging mode. The new DC system run with silicon controlled rectifying power supply for battery.
1.Adopt advanced MCU microprocessor control technology.
2.Advanced MPPT Technology, High converting efficiency higher than 97% for minimizing energy loss.
3.Reversed current protection at night, over voltage and reverse polarity protection.
4.Capable of selecting different charging mode for various types of batteries.
5.Could be built-in battery and air-condition
7.Industy-leading power density compact size and high reliability;
8.Doorframe designed with waterproof structure, posted on the seal and equipped with waterproof lock on the door
double insulation design;
9.Cabine adopt quality galvanized sheet or aluminum coated steel sheet as material, surface coating anti-UV power;
10.the built-in 19 "power supply equipment;
11.Suitable for outdoor installation.
13.Remote control system
14.Environment Temperature detection
Fine dust-proof, water-proof features
According to the overall standard of design dust-proof a n d w ater-proof Ip55
1.With sun protection,heat insulation,roof ventilation
2.With waterproof and the filtration dust inlet, the cabinet front door shutters withw a terproof design.